INES Mapper 087

From NESdev Wiki
Jump to navigationJump to search


J87
Company Konami, Jaleco, Taito
Boards JF-0x, JF-10 (Jaleco), FC-009 (Taito), MF4034/30xxA (Konami)
PRG ROM capacity 32K
PRG ROM window n/a
PRG RAM capacity None
CHR capacity 16k (most games), 32K (JF-09/JF-10 only)
CHR window 8K
Nametable mirroring Fixed H or V, controlled by solder pads
Bus conflicts No
IRQ No
Audio No
iNES mappers 087, 101
NESCartDB
iNES 087


J87 (Also known as Mapper 87) refers to the first "mapper" created for the Famicom. Despite this, no games with this mapper ever made it overseas to USA NES owners. iNES Mapper 101 is the same board, but for a dump that naïvely reversed the CHR bit-order. CNROM is a later cost-reduced version of this mapper, by cutting down on one logic chip, at the cost of having bus conflicts, and also has the CHR bank order reversed as well. Most games are capped at 16k CHR, however, the JF-09 and JF-10 boards contain an additional trace that allows the design to address 32k. All games with this mapper are emulated as the 32k variant.

The name "J87" was given to this mapper due to its historical significance, and creation by Jaleco. Otherwise, no "canonical" name was given to this mapper. Jaleco would later upgrade this mapper to become iNES Mapper 140.

Banks

  • CPU $8000-$FFFF: 16 KB PRG ROM, fixed (if 16 KB PRG ROM used, then this is the same as $C000-$FFFF)
  • CPU $C000-$FFFF: 16 KB PRG ROM, fixed
  • PPU $0000-$1FFF: 8 KB switchable CHR ROM bank

Registers

Bank Select ($6000-$7FFF)

This will select an 8 KB CHR ROM bank for PPU $0000-$1FFF.

7  bit  0
---- ----
xxxx xxLH
       ||
       |+- High CHR bit
       +-- Low CHR bit